TEnergyMeterObj

TEnergyMeterObj
Type-access	Command	Description
Implements the following properties/methods as in 3.3.15: MakePosSequence RecalcElementData CalcYPrim GetCurrents GetInjCurrents GetPropertyValue InitPropertyValues DumpProperties
Method-private	Integrate	Performs the integration of the demand interval registers.
Method-private	SetDragHandRegister	Stores data in the shift registers for DI.
Property-private	Accumulate_Load	Accumulate load in meter’s zone.
Method-private	Accumulate_Gen	Accumulate generation in meter’s zone.
Method-private	CalcBusCoordinates	Calculates bus coordinates using interpolation.
Property-private	AddToVoltBaseList	Add to VoltBase list if not already there and return index.
Property-private	MakeDIFileName	Creates and returns the name for the DI report file.
Property-private	MakeVPhaseReportFileName	Creates and returns the name for the phase voltage report file.
Method-private	AssignVoltBaseRegisterNames	Assigns voltage base to register names (DI)
Method-private	TotalupDownstreamCustomers	Totalizes the number of customers in the zone.
Method-protected	OpenDemandIntervalFile	Opends DI file.
Method-protected	WriteDemandIntervalData	Writes in DI file.
Method-protected	CloseDemandIntervalFile	Closes in DI file.
Method-protected	AppendDemandIntervalFile	Appends to DI file.
Method-public	ResetRegisters	Resets the meter registers.
Method-public	TakeSample	Update registers from metered zone. Assumes one time has taken place since last sample. Overrides the more generic class.
Method-public	SaveRegisters	Saves the meter register in the meter file.
Method-public	MakeMeterZoneLists	This gets fired off whenever the bus lists are rebuilt. Must be updated whenever there is a change in the circuit.
Method-public	ZoneDump	Dumps the elements within the zone into the meter file assigned.
Method-public	InterpolateCoordinates	Completes the missing bus coordinates by interpolation.
Method-public	EnableFeeder	HasFeeder must be true before feederObj will be re-enabled. Not implemented.
Method-public	AllocateLoad	Allocates load across the feeder model using allocation factors.
Method-public	ReduceZone	Reduce Zone by eliminating buses and merging lines.
Method-public	SaveZone	Run down the zone and write each element into a file.
Method-public	GetPCEatZone	Gets all the PCE within the meter zone.
Method-public	CalcReliabilityIndices	Calculates the feeder’s reliability indices using backward forward sweep.

© 2024 Electric Power Research Institute (EPRI), Inc. All rights reserved. Electric Power Research Institute and EPRI are registered marks of the Electric Power Research Institute, Inc. in the U.S. and worldwide.