TFaultObj

TFaultObj
Type-access	Command	Description
Implements the following properties/methods as in TLineObj: RecalcElementData CalcYPrim GetLosses GetPropertyValue InitPropertyValues DumpProperties MakePosSequence
Property-private	FaultStillGoing	Returns a Boolean indicating if the fault is still active.
Method-public	CheckStatus	Checks and sets the fault status depending on the simulation mode and fault features.
Method-public	Reset	Resets (clear) the fault.

© 2024 Electric Power Research Institute (EPRI), Inc. All rights reserved. Electric Power Research Institute and EPRI are registered marks of the Electric Power Research Institute, Inc. in the U.S. and worldwide.