TLineObj

TLineObj
Type-access	Command	Description
Method-private	FMakeZFromGeometry	Make new Z, Zinv, Yc, etc. from line geometry reference.
Method-private	KillGeometrySpecified	Indicate No Line Geometry specification if this is called.
Method-private	FMakeZFromSpacing	make new Z, Zinv, Yc, etc. from linespacing reference.
Method-private	KillSpacingSpecified	Indicate No Line spacing specification if this is called.
Method-private	ClearYPrim	Clears the Y primitive memory spaces.
Method-private	ResetLengthUnits	Resets the length units to the default.
Method-private	UpdatePDProperties	Updates inherited properties.
Property-private	NumConductorData	Defines the number of conductors for the element.
Property-private	FetchConductorData	Gets the conductor data from the conductor data reference.
Method-private	ReallocZandYcMatrices	Reallocate Z and Y matrices in memory (possible expansion).
Method-private	DoLongLine	Long Line Correction for 1=phase.
Method-private	ConvertZinvToPosSeqR	For GIC analysis, primarily. Uses only real part of Z.
Method-public	GetLosses	Overrides the more specific class specification. Calculates the losses for the area.
Method-public	GetSeqLosses	Overrides the more specific class specification. Calculates the losses for the area using sequential components.
Method-public	RecalcElementData	See 3.1.9.
Method-public	CalcYPrim	See 3.1.9.
Method-public	MakePosSequence	See 3.1.9.
Property-public	MergeWith	Merge this line with another line and disable the other line.
Method-public	UpdateControlElements	Updates the elements controlled/assigned to the controllers in the model.
Property-public	GetPropertyValue	See 3.1.9.
Method-public	InitPropertyValues	See 3.1.9.
Method-public	DumpProperties	See 3.1.9.
Method-public	FetchLineCode	Loads the line code given in the argument into the active line.
Method-public	FetchGeometryCode	Loads the line geometry given in the argument into the active line.
Method-public	FetchLineSpacing	Loads the line spacing given in the argument into the active line.
Method-public	FetchWireList	Loads the wire data given in the argument into the active line.
Method-public	FetchCNCableList	Loads the CNCable data given in the argument into the active line.
Method-public	FetchTSCableList	Loads the TSCable data given in the argument into the active line.
Method-public	CalcFltRate	Overrides the generic class declaration. Calculates failure rates for section and buses.

© 2024 Electric Power Research Institute (EPRI), Inc. All rights reserved. Electric Power Research Institute and EPRI are registered marks of the Electric Power Research Institute, Inc. in the U.S. and worldwide.